C3010 – C3030

The C3010 and C3030 instruments are full parameter dual channel instruments. Each channel has it’s own
measurement hardware. All values can be displayed simultaneously on the screen. There is no interference between the channels
when measuring pH/ORP/ Ion and conductivity in the same solution! C3011 and C3031 variations have an Ethernet connection
instead of USB.
2 sets of gold plated BNC connectors of which each accepts different electrodes, including conductivity electrodes. Gold plating
prevents corrosion of BNC connectors. Via an easy to use menu system, the device can be configured for your measurements.
A built-in help system will help you through all steps to use the instrument successfully.
Besides the pre-programmed pH buffers and EC standards, you can also add your own buffer and standard tables. Not just a certain
value at a certain temperature but the complete temperature related table of your specific buffer. Add up to 5 pH buffers and 3 EC
standards of your own choice and use them as if they are built-in.
Two temperature inputs are independent from measurement channels. ATC for each channel can be selected from any of the
temperature inputs. The device can be connected to a PC and completely controlled via either USB/RS232 or Ethernet/RS232.
Both software and communication protocol can be downloaded from our website.



Multichannel up to 2 measurements can be performed at the same time and simultaneously or individually shown on the display. Each channel can measure 2 times per second.

No interference between pH/ORP/Ion and conductivity electrodes in the same solution

Custom calibration tables allows the user to add complete buffer/standard-temperature relation tables. With this feature the built-in tables can be extended with your own tables. Tables can be entered via a device menu or uploaded from a PC.

Wide Display shows 2 channels at the same time including temperature and date/time.

Stability indicator ensures visualisation when the measurement has stabilised.

Stability algorithm ensures stable readings with ability to detect fast changes.

Hold function allows to freeze the display

Selectable resolution for more stable readings of mV, pH and DO.

Range lock for conductivity measurements.

Capacitive compensation eliminates the capacitive component of the electrode and cable when measuring low conductivities.

Galvanic isolated USB interface eliminates ground loop effects when connected to a PC (C3010,C3030 only).

Ethernet connection allows remote access to the device via LAN or Internet (C3011,C3031 only).

GPL report can be shown on the display or sent to the digital port.

Pre-programmed standards
pH: 1.68, 2.00, 4.00, 4.01, 6.87, 6.99, 9.18, 9.21, 10.01, 12.00, 12.45 (at 25°C)
Conductivity: 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm (at 25°C)

Free software and firmware updates downloadable from www.consort.be