C3040

With 6 multi-parameter measurement channels and 6 temperature channels the C3040 can perform 6 different measurements at the same time with individual temperature compensation. All measurements, including temperature, can be shown simultaneously or individually on the wide display. C3041 version has an Ethernet connection instead of USB.

All 6 gold plated BNC connectors accept different electrodes of witch 2 connectors also accept conductivity electrodes. There is no interference between the channels when measuring pH/ORP/Ion and conductivity in the same solution.

Besides the pre-programmed pH buffers and EC standards, you can also add your own buffer and standard tables. Not just a certain value at a certain temperature but the complete temperature related table of your specific buffer. Add up to 5 pH buffers and 3 EC standards of your own choice and use them as if they are built-in.

Six temperature inputs are independent from measurement channels. ATC for each channel can be selected from any of the temperature inputs. The device can be connected to a PC and completely controlled via either USB/RS232 or Ethernet/RS232. Both software and communication protocol can be downloaded from our website.

Category:

Description

Multichannel up to 6 measurements can be performed at the same time and simultaneously or individually shown on the display. Each channel can measure 2 times per second.

No interference between pH/ORP/Ion and conductivity electrodes in the same solution

Custom calibration tables allow the user to add complete buffer/standard-temperature relation tables. With this feature the built-in tables can be extended with your own tables. Tables can be entered via a device menu or uploaded from a PC.

Wide Display shows up to 6 channels (selectable) at the same time including temperature and date/time.

Stability indicator ensures visualisation when the measurement has stabilised.

Stability algorithm ensures stable readings with ability to detect fast changes.

Hold function allows to freeze the display

Selectable resolution for more stable readings of mV, pH and DO.

Range lock for conductivity measurements.

Capacitive compensation eliminates the capacitive component of the electrode and cable when measuring low conductivities.

Galvanic isolated USB interface eliminates ground loop effects when connected to a PC (C3040 only).

Ethernet connection allows remote access to the device via LAN or Internet (C3041 only).

GPL report can be shown on the display or sent to the digital port.

Pre-programmed standards
pH: 1.68, 2.00, 4.00, 4.01, 6.87, 6.99, 9.18, 9.21, 10.01, 12.00, 12.45 (at 25°C)
Conductivity: 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm (at 25°C)

Free software and firmware updates downloadable from www.consort.be